Co Feature Code Service For Code Restriction - NEC Electra Elite IPK Programming Manual

Electra Elite IPK
___________________________________________________________________________________
1-1-82 CO Feature Code Service for Code
Restriction
General Description
Use this Memory Block to define a code to send to the CO in front of the dialed
number to allow completion of a CO call made to a Code restricted number set to
allow.
C o d e
T a b l e
D a t a
0 1 ~ 1 0
N o .
8 2 : 0 1 =
T I M E
Programming Procedures
1 Go off-line.
H B
2 Press LK1 + LK1 +
3 Use the dial pad to enter the Feature Code for Restriction to Code Table 01.
Use the following to enter data:
J
t o move the cursor left
L
t o move the cursor right
K I
~ t o enter numeric data
G
4 Press to write the data.
5 Repeat Steps 3 and 4 for all code Tables. The next Memory Block is displayed.
6 Program the next Memory Block or press
Example: Set Code Table 01 to 67
When Tel 100 user dials Access Code 9, Feature Code 67 Telephone Number 12147517000 to access a line
that is code restricted, the code restriction starts at 12147517000. When code restriction is set to allow, the 1214
matches and the call goes through. When Code restriction is deny, the 1214 matches and user receives a
reorder tone and ERROR is displayed on telephones that have a display.
___________________________________________________________________________________
Programming Manual
S e t t i n g
D a t a
D I S P L A Y
to access the Memory Block.
E
to go back on-line.
Default Values
Not specified
Notes
Document Revision 4
System Mode
1
Submode
1
Data No.
82
PC Programming
+AC
2 - 103