NEC Electra Elite IPK Programming Manual page 303

Document Revision 4
___________________________________________________________________________________
Programming Procedures
1 Go off-line.
A C
2 Press LK1 + LK8 +
3 Press corresponding CO/PBX line key to change data option.
Use to the following to enter data:
K I
~
t o enter VRS Channel and message number
J
t o move cursor left
L
C
t o move cursor right
A
to go to the next page
to go back to the previous page
G
4 Press to write the data and advance to the next message. After Message No. 16, the next VRS is displayed.
5 Repeat Steps 3 and 4 for each message for each VRS. The next Memory Block is displayed.
6 Program the next Memory Block or press
Related Programming
Refer to individual features in the Electra Elite IPK Features and Specifications Manual.
___________________________________________________________________________________
2 - 226
to access the Memory Block.
E
to go back on-line.
Electra Elite IPK
Default Values
All Channels of Block: No Message
Memory Blocks