Attendant Add-On Console To Telephone Port Assignment - NEC Electra Elite IPK Programming Manual

Electra Elite IPK
___________________________________________________________________________________
1-6-01 Attendant Add-On Console to
Telephone Port Assignment
General Description
Use this Memory Block to assign an Attendant Add-On Console to a telephone port
number.
Display
D a t a
N o .
T i t l e
0 1 : D S S
T I M E
Programming Procedures
1 Go off-line.
2 Press LK1 + LK6 to access this Memory Block.
3 Use the dial pad to enter the data.
Use the following to enter data:
J
t o move the cursor left
L
t o move the cursor right
K I
~ t o enter numeric data
G
4 Press to write the data and advance to the next DSS No.
5 Repeat Steps 3 and 4 for each DSS. The next Memory Block is displayed.
6 Program the next Memory Block or press
Related Programming
M.B. Number Memory Block Name
7-2 Telephone Type Assignment
1. The telephone with an Attendant Add-On Console connected must be specified by port number.
2. A maximum of four Attendant Add-On Consoles can be connected to a system.
3. A maximum of four Attendant Add-On Consoles can be connected to one telephone.
___________________________________________________________________________________
Programming Manual
D S S N o . D a t a
1 ~ 4 S e t t i n g
1 = P 0 1
D I S P L A Y
E
to go back on-line.
Default Values
Notes
Document Revision 4
System Mode
Submode
Data No.
PC Programming
+BTD
DSS Tel Port No.
1 › 01
2 › 02
3 › 01
4 › 02
1
6
01
2 - 183