Section 1 Character Assignment - NEC Electra Elite IPK Programming Manual

Document Revision 4
___________________________________________________________________________________
LK 1 System Mode
LK 2 ICM (Continued)
Data
Memory Block Name
No.
08 Specified Station Access Code
Assignment
9~18 Customized Message 1~10
Assignment
19 Intercom Ring Pattern Selection
20 Intercom Ring Tone Selection
21 PS Telephone Block Assignment
22 Call Forward – No Answer Time
Selection
23 System Call Park Recall Time
Selection
24 Intercom Feature Access Code
Assignment
25 Internal Paging Alert Tone
Selection
26 Delayed Ringing Time Assignment
(ICM)
30 PS Out of Area Time Assignment
32 IP Telephone Block Assignment
33 IP Telephone Block Assignment
Allow/Deny Selection
___________________________________________________________________________________
1 - 18
Default Value
00 = 01
01 ~ 23 Not Set
09 = DND
10 = MEETING
11 = BUSINESS
TRIP
12 = NOT IN
13 = WITH GUEST
14 = OUT OF
OFFICE
15~18 = Not
Specified
B
A
No CAR Blocks are
Assigned
8s (R2500 or lower)
12s (R3000 or
higher)
1.0 (R2500 or lower)
060s(R3000 or
higher)
Refer to 1-2-24 Intercom Feature Access Code Assignment on
page 2-126.
YS
10s
08s
Off (No IP Phone
Blocks Assigned)
YS (Allow)
Electra Elite IPK
Programming Values
Tel. Port Number
Maximum of 13 characters.
Refer to Appendix B Character
Section 1 Character Assignment on
page B-1 for a list of characters.
OFF, ON, A~H
A~H
CAR Blocks:
Port 01~C0 - 4 ports per block
4s, 8s, 12s, 18s, 24s, 30s, 60s (R2500
or lower)
01s~99s (R3000 or higher)
In minutes: 0.5, 1.0, 1.5, 2.0, 3.0, 5.0,
8.0, 10.0 (R2500 or lower)
001s~999s (R3000 or higher)
YS (Tone provided)
NO (No Tone)
00~99 sec.
00~99 sec.
Off
ON (Green), IP Assigned
On (Red), Block Not available
YS (Allow), NO (Deny)
Multiline Terminal Programming
Codes,