NEC Electra Elite IPK Programming Manual page 58

Electra Elite IPK
___________________________________________________________________________________
LK 1 System Mode
LK 8 PBR/Miscellaneous (Continued)
Data
Memory Block Name
No.
26 Voice Mail Quick Transfer Master
Hunt Number
27 Forced Account Code Length
Assignment
29 SCD (Simplified Call Distribution)
Pilot Number Assignment
30 SCD Group Agent Assignment
31 Hold Tone Source Assignment
32 Hold Internal Tone Volume
Selection
33 Master Clock Selection
35 COM Port Baud Rate Setting
Assignment
36 COM Port Parity/Stop Bit Setting
Assignment
37 General Purpose Relay Assignment
38 Modem Number for Remote
Programming Assignment
40 ACD Hunt Time
43 Enhanced 911 Trunk Assignment
44 Enhanced 911 Alternate Route
Assignment
___________________________________________________________________________________
Programming Manual
Default Value
000
10DGT
Not Assigned
Not Assigned
INT
0dB
Cabinet 0 (Master
System)
COM 1 = 38.4
COM 2 = 4.8
COM 3 = 9.6
NON/1
NO
Not Assigned
10s
LK1, CO/PBX No.
No Alternate Route
Document Revision 4
Programming Values
Station numbers:
2-digit 10-89
3-digit 100-899
4-digit 1000-8999
5-digit 10000-89999
6-digit 100000-899999
7-digit 1000000-8999999
1~13 Digits
Pilot Number for up to four Groups
1~4 Digits
INT, EXT
0dB, -6dB
Cabinet: 0,1~3
Slot: 1~8
4.8 Kbps, 9.6 Kbps, 19.2 Kbps, 38.4
Kbps
NON/1, NON/2, EVEN/1, ODD/1
NO, YS
Any Unused Extension Number
(1~4 digits)
10s, 20s, 30s, 60s, 120s, 240s,
∞ ( No Limit).
CO/PBX trunks 01~64 / Trunk Group/
Route Advance Block
No Alternate Route
101~132 for Trunk Group 01~32
201~216 for Route Advance Block
01~16
1 - 25