NEC Electra Elite IPK Programming Manual page 610

Electra Elite IPK
___________________________________________________________________________________
1. Prime Line function enables a user to seize a specified trunk when the Multiline Terminal goes off-hook. Refer to
function codes 063 and 064 for Memory Blocks 1-1-46 [Access Code (1-Digit) Assignment] and 1-1-47 [Access
Code (2-Digit) Assignment].
2. To call the specified station number or CO line on Hot Line, go off-hook.
3. When using Prime Line an access code (
(ICM) Dialtone for internal call processing.
4. To use Hot Line Assignment, one of the following must be entered:
Station Number
Access Code and Dial Number
Speed Dial Access Code and Speed Dial Buffer Number
5. Only 10 digits can be assigned.
6. Telephone ports A0~C0 are ports 100~120.
___________________________________________________________________________________
Programming Manual
Notes
A E
and ) or ICM key can be used to seize the intercom
Document Revision 4
2 - 533