Flow Control For Full Duplex Selection - NEC Electra Elite IPK Programming Manual

Document Revision 4
___________________________________________________________________________________
Related Programming
M.B. Number Memory Block Name
7-1 Card Interface Slot Selection
1-16-00 Auto Negotiation Yes/No Selection
1-16-01 Port Speed Selection – 10/100 Base T
1-16-02 Port Duplex Mode Selection
1-16-03
MDI/MDIX Mode Selection
1-16-04
VLAN Mode Selection
1-16-05
Default VLAN ID Tag Insertion Assignment
1-16-06
Port Based Priority Selection
1-16-07 High Priority RX Tag Threshold
1-16-08 High Priority TX Tag Assignment
1-16-09 Low Priority TX Tag Assignment
1-16-10 Port Mirroring Selection
1-16-11 Mirroring Source Port Assignment
1-16-12 Mirroring Target Port Assignment
1-16-13
VLAN Group to VLAN ID Assignment
1-16-14
Port VLAN Group Membership
1-16-16

Flow Control for Full Duplex Selection

1-16-17
Back Pressure for Half Duplex Selection
1. Only one HUB(8)-U( ) ETU can be assigned and installed for each cabinet.
2. When this Memory Block is set to NO, the Tag is deleted from the packet for transmission on this port with the
specific VLAN GRP.
___________________________________________________________________________________
2 - 410
Notes
Electra Elite IPK
Memory Blocks