NEC Electra Elite IPK Programming Manual page 290

Electra Elite IPK
___________________________________________________________________________________
Classes 00 15 are programmed in this Memory Block as feature restriction classes. In Memory Block 4-17 (Station to
~
Class of Service Feature Assignment) specify any class of service for each telephone to assign features the user can/
cannot activate.
Corresponding
CO/PBX Line
Key
Page 1
LK1 Night Mode Switching (System-Wide))
LK2 Night Mode Switching (Tenant)
LK3 System Speed Dial Programming
LK4 Not Used
LK5 Not Used
LK6 Not Used
LK7 Automatic Trunk-to-Trunk Transfer (Set/Reset) and programming of
Outgoing Numbers
LK8 Automated Attendant/DISA Mode (Set/Reset)
Page 2
LK1 Timed Alarm (Set/Reset) for Single Line Telephones (From Attendant)
LK2 Call Forward – All Call (Set/Reset) from Destination Station, Call
Forward CAR Keys, Call Forward – All Call Set, and Call
Forward – Busy/No Answer set
LK3 System-Wide Reset of Timed Alarm, Call Forward – All Call, Do Not
Disturb, Customized Message, and Callback Request
LK4 Cancel Station Lockout and Default Password for another Station
LK5 DISA Password Cancel
LK6 DISA Password Confirmation
LK7 Automated Attendant Weekend Mode (Set/Reset) Tenant
LK8 Forced Account Code/Authorization Code Programming
Page 3
LK1 Terminal Exchange Mode Set
LK2 CO VM Callback Telephone Number Programming (R2000 or higher)
LK3 Station Name Assignment – All stations (R4000 or higher)
LK4 LK8 Not Used
~
___________________________________________________________________________________
Programming Manual
Function Name
Document Revision 4
Default Default
Class 00 Class 01
Allow Deny
Allow Deny
Allow Deny
N/A N/A
N/A N/A
N/A N/A
Allow Deny
Allow Deny
Allow Deny
Allow Deny
Deny Deny
Allow Deny
Allow Deny
Allow Deny
Allow Deny
Allow Deny
Allow Deny
Allow Deny
Deny Deny
N/A N/A
2 - 213
15
~