NEC Electra Elite IPK Programming Manual page 183

Document Revision 4
___________________________________________________________________________________
Display (R3000 or higher)
D a t a
N o .
0 0 : P A G I N G
T I M E
Programming Procedures
1 Go off-line.
2 Press LK1 + LK2 to access the Memory Block.
3 Use the dial pad to enter the Data Setting for Class 1.
Setting Data
G
000s~255s (e.g., 020s = 20s)
4 Press to write the data and display the next Timer Class of Service.
5 Program the next Timer Class of Service or press
Related Programming
M.B. Number Memory Block Name
1-7-06 External Paging Timeout Selection
4-93 Internal Zone Paging Selection
4-71
Station to Timer Class of Service (R3000 or higher)
1. Types of paging include:
All Internal Zone (51)
Internal Zone Paging (52~54)
External Zone Paging (all speakers) (55)
External Zone Paging (individual speakers) (56~58)
Internal/External Zone Paging (59)
2. Telephone Ports 1 and 2 are in Station to Timer Class of Service, Class 1, by default. All other ports are in
Station to Timer Class of Service, Class 2, by default.
3. When a system is upgraded from R2500 or lower to R3000 or higher, the Internal Paging Timeout Selection is
reset to the default during the upgrade process.
___________________________________________________________________________________
2 - 106
T i m e r
C l a s s
S e t t i n g
1 ~ 4
T i t l e
D a t a
1 = 0 9 0 s
D I S P L A Y
E
to go back on-line.
Notes
Electra Elite IPK
Default Values
Class 1~4 = 090s
000s = No Limit
Memory Blocks