NEC Electra Elite IPK Programming Manual page 471

Document Revision 4
___________________________________________________________________________________
Related Programming
M.B. Number Memory Block Name
7-1 Card Interface Slot Selection
1-16-00 Auto Negotiation Yes/No Selection
1-16-01 Port Speed Selection – 10/100 Base T
1-16-02 Port Duplex Mode Selection
1-16-03
MDI/MDIX Mode Selection
1-16-04
VLAN Mode Selection
1-16-05
Default VLAN ID Tag Insertion Assignment
1-16-06
Port Based Priority Selection
1-16-08 High Priority TX Tag Assignment
1-16-09 Low Priority TX Tag Assignment
1-16-10 Port Mirroring Selection
1-16-11 Mirroring Source Port Assignment
1-16-12 Mirroring Target Port Assignment
1-16-13 VLAN Group to VLAN ID Assignment
1-16-14
Port VLAN Group Membership
1-16-15
VLAN Tag Insertion Selection
1-16-16
Flow Control for Full Duplex Selection
1-16-17
Back Pressure for Half Duplex Selection
1. Only one HUB(8)-U( ) ETU can be assigned and installed for each cabinet.
2. This Memory Block selects which priority field to assign as High. When a received frame contains a Tag per
IEEE802.1q definition, the HUB(8)-U( ) ETU can assign high priority based on this Memory Block.
3. This Memory Block is effective only when Memory Block 1-16-06 (Port Based Priority Selection) is set to NO.
___________________________________________________________________________________
2 - 394
Notes
Electra Elite IPK
Memory Blocks