Avaya DEFINITY Server CSI Maintenance Manual page 619

ADX8D-PT (AUDIX Digital Port)
Table 31. TEST #13 Voice and Control Channel Local Loop Test — Continued
Error Test
Code Result
1001 ABORT System resources required for this test are not available.
1002 ABORT The system could not allocate time slots for the test. The system may be
under heavy traffic conditions, or may have time slots that are out-of-service
due to TDM-BUS errors.
1003 ABORT The system could not allocate a tone receiver for the test. The system may be
oversized for the number of Tone Detectors present, or some Tone Detectors
may be out-of-service.
1004 ABORT The port was put in use during the test. Use display port PCSSpp to
determine the voice port extension of the port. Use status station to
determine the service state of the port. If the service state indicates that the
port is in use, wait until the port is idle before retesting.
2000 ABORT Response to the test was not received within the allowable time period.
2100 ABORT Could not allocate the necessary system resources for this test.
555-233-119
Description/Recommendation
1. Retry the command at 1-minute intervals a maximum of 5 times.
1. If the system has no TDM-BUS errors, and is not handling heavy traffic,
retry the command at 1-minute intervals a maximum of 5 times.
1. Resolve any "TTR-LEV" errors.
2. Resolve any "TONE-PT" errors.
3. If neither condition exists, retry the command at 1-minute intervals a
maximum of 5 times.
1. Retry the command at 1-minute intervals a maximum of 5 times.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Continued on next page
Issue 5 October 2002
619