Avaya DEFINITY Server CSI Maintenance Manual page 255

display system-parameters maintenance
Scheduled Maintenance
A series of maintenance tests and operations runs automatically every day
according to the schedule and settings specified in the following fields.
The hour and minute (24-hour notation) at which daily scheduled
Start Time
maintenance begins. (22:00)
Time (hour and minute) when scheduled daily maintenance stops. If
Stop Time
any daily maintenance operations are not completed by this time, the
system notes where in the sequence it stopped and perform those
operations during the next scheduled daily maintenance.
This display-only field simply represents the series of tests that are
Daily
Maintenance
always run by maintenance software as part of daily maintenance.
This field indicates on which days translation data in memory will
Save Translation
automatically be saved to the Mass Storage System disk and/or tape
devices during scheduled maintenance. The save operation is first
made to disk, followed by a disk backup to tape. On systems with
duplicated SPEs, translation data is saved on both SPEs. Valid
entries are daily, days of the week, or no. "No" specifies that no
automatic saves are to be executed. (daily)
Each port network has a pair of TDM busses called A and B, each of
Control Channel
Interchange
which has a set of time slots dedicated to use by the control channel.
At any one time, the control channel in each PN is carried on only
one of the two busses. This field indicates on which days the control
channel in each port network will be switched from one of the paired
TDM busses to the other. Valid entries are daily, days of the week,
or n. "No" specifies that no interchange be executed. Default is n.
This field indicates whether or not the expansion links between
EXP-LINK
Interchange
port-networks are interchanged as part of scheduled maintenance.
The value "daily'' means that EXP-LINK interchange occurs
automatically everyday. The value "no'' means that EXP-LINK
interchange is not done automatically as part of scheduled
maintenance. Values represented by the days of the week mean
that EXP-LINK interchange occurs automatically on the specified
day only. Since EXP-LINK interchange only applies to duplicated
systems, simplex systems do not display this field. Default is n.
When the number of touch tone receivers (TTRs) in service falls
Minimum
Threshold for
below this number (4 to 200), a WARNING alarm is raised against
TTRs
TTR-LEV. These are also known as dual-tone multifrequency
receivers (DTMRs). There are 8 TTRs on each TN2182. To alarm
the first occurrence of a TTR being taken out of service, set this field
to the total number of TTRs in the system.
555-233-119 Issue 5 October 2002
255