Avaya DEFINITY Server CSI Maintenance Manual page 488

Maintenance Commands
Field descriptions
(cabinet/carrier/slot/circuit) of the ISDN-PRI B-channel.
Port
The measured bit error count based on the comparison between sent
Bit Error Rate
and received bit patterns. (Number displays in scientific notation)
Number of bits generated. (Number displays in scientific notation)
Number of Bits
The measured block error count based on the comparison between
Block error Rate
sent and received bit patterns. (Number displays in scientific notation).
Number of blocks generated. (Number displays in scientific notation)
Number of Blocks
Test call start time. (dd/hh:mm).
Start Time
Specified run time for the test call. (1-120 minutes, or blank = default
Duration
Specified
of 10 seconds).
Run time for the test call, listed in minutes. "blank" = a default time.
Duration of Test
Reason that the test call terminates: "finished," "canceled," "overflow,"
Reason of
Termination
"no bits," "transmission," "internal fail," "data corrupt," "call dropped,"
"call rejected," and "in progress." "finished" = the test finishes in the
specified time. "canceled" = the test call cancels with the clear
isdn-testcall command. "overflow" = the transmitted bits overflow
buffer allocation. "no bits" = no bits are received because the
ISDN-PRI test call circuit connection is bad. "transmission" = a data
transmission interrupts, probably from a power hit. "call dropped" = the
call drops due to an abnormal termination, or inability to cut-through to
the other side. "call rejected" = the originating call is not set up
properly. "internal fail" = an internal error on the Maintenance/Test
circuit pack. "in progress" = the test is still running; "data corrupt" = any
other error condition.
488
Issue 5 October 2002
555-233-119