Avaya DEFINITY Server CSI Maintenance Manual page 690

Maintenance Objects
Table 54. TEST #48 Station Present Test — Continued
Error Test
Code Result
PASS
0 NO
BOARD
690
Issue 5 October 2002
Description/Recommendation
The station is connected properly to the switch. Investigate user-reported
troubles on this port by running other port tests, by examining station
wiring, or by inspecting the station.
NOTE:
This test may also pass if no terminal equipment is connected and
the terminal is located very far from the switch.
The test could not relate the internal ID to the port (no board). This result
could be due to incorrect translations, no board is inserted, an incorrect
board is inserted, or an insane board is inserted.
1. Check to make sure that the board translations are correct. Use list
configuration and resolve any problems.
2. If the board is correctly inserted, use busy board UUCSS.
3. Issue reset board UUCSS.
4. Issue release board UUCSS.
5. Issue test board UUCSS long. This re-establishes the link between
the internal ID and the port.
6. If this is not the case, check to make sure that a valid board is inserted.
Continued on next page
555-233-119