Display Initcauses - Avaya DEFINITY Server CSI Maintenance Manual

Maintenance Commands

display initcauses

Use display initcauses to display a history of recovery steps taken by the
system. Each time the system performs some type of recovery (due to user
request or a hardware or software problem), the recovery information is stored.
The software error log also contains information pertaining to restarts. If a reset 4
(reboot) occurs, the software error log is also be stored. Information in the
software error log should be used in conjunction with information in the initcauses
log.
The history of the last 16 restarts performed by the system will be recorded to the
initcauses buffer in chronological order. This buffer fills an entire screen with
information if it is completely full. Power failures in the processor complex wipe
out the entire initcauses buffer.
Action/Object Qualifier
display print
initcauses
schedule
1 See the Report Scheduler and System Printer feature specification for more details.
Output
The following example shows the output from display initcauses.
display initcauses
Cause
System Technician Request
Upgrade Software
Software Request
242
Issue 5 October 2002
Qualifier Description
Report sent to printer
Use the screen to schedule
execution of the command. The
command is placed in the
command queue and is executed
at the specified time. The
information displayed by the
command is sent to the system
printer instead of the screen.
Examples:
display initcauses
display initcauses print
display initcauses schedule
INITIALIZATION CAUSES
Action Escalated
4 no
2 no
1 no
Logins Default
init none
inads
craft
nms
1
Carrier Time
1A 08/05
1A 08/05
1A 08/09
Feature Interactions
none
9:15
9:29
2:34
555-233-119