Avaya DEFINITY Server CSI Maintenance Manual page 135

ATM Tips
A500:show signaling routes
Number of Local Static Routes Allowed: 30
Current number of Local Static Routes: 2
Address: 47.00.05.80.ff.e1.00.00.00.f2.07.2a.01.00.00.00.00.00.00.00
mask:152 cost:
Address: 47.00.05.80.ff.e1.00.00.00.f2.07.1b.02.00.00.00.00.00.00.00
mask:152 cost:
Screen 27. Screen output from the show signaling routes command
Check that the Address field (admin signaling route add command)
matches those administered in the Avaya MultiVantage Software running
on the Definity Server CSI.
2. If the A500 was administered using End System Identifiers, enter show
signaling esi on the A500 console
A500:show signaling esi
Addresses registered on A1.1
----------------------------
* 45.0001.01303538105300000000.000000000011.00
Addresses registered on A1.2
----------------------------
* 45.0001.01303538105300000000.000000000012.00
( * - configured )
Screen 28. Screen output A500: show signaling esi command
Check that the Addresses registered (use admin signaling esi add)
match those administered in the Avaya MultiVantage Software running on
the Definity Server CSI.
— If an address or End System Identifier is missing or incorrect on the
— If an address or End System Identifier is missing or incorrect on the
555-233-119
0 node:self port:A1.2 state:UP
0 node:self port:A1.1 state:UP
A500 port associated with the PPN, the EAL and PACL links will
come up, but one-way talk paths may result. (The ATM network can
route from the PPN to the EPN, which creates the bidirectional EAL
and PACL signaling channels and one side of the talk path.)
A500 port associated with the EPN, the links will not come up
between the PPN and the EPN.
(Screen 28).
Issue 5 October 2002
135