Set Signaling-Group; Set Synchronization - Avaya DEFINITY Server CSI Maintenance Manual

set signaling-group

set signaling-group
Use set signaling-group to upgrade secondary D-channel in specified signaling
groups to primary D-channels. Current primary D-channel then revert to
secondary D-channels. A signaling group is a collection of B-channels that
designate single D-channels or a set of D-channels signals over an ISDN-PRI.
Action/Object Qualifier
set group
signaling-group identifier

set synchronization

Use set synchronization to set DS1 trunks or active tone/clock circuit packs that
supply references for synchronization. The set synchronization command works
after disable synchronization disables synchronization.
DS1 or tone/clock circuit packs remain synchronization references until set
synchronization runs with another board or until enable synchronization runs.
After enable synchronization runs, administered primary or secondary
synchronization sources become synchronization references. If no primary or
secondary source is administered, synchronization uses active tone/clock boards
as synchronization references after synchronization is enabled.
The synchronization subsystem provides error-free digital communication
between the switch and other PBXs, COs, or customer premise equipment.
System components involved in synchronization include: TDM bus clock, DS1
trunk board, and maintenance and administration software resident in the SPE.
Action/Object Qualifier
set location
synchronization
555-233-119
Qualifier Description
administered number
associated with each
signaling group.
Qualifier Description
Physical position of the DS1
trunk or active tone/clock:
PCSS
Logins Defaults Feature Interactions
init none none
inads
craft
Logins Default Feature Interactions
init none none
inads
craft
Issue 5 October 2002
411