Announce (Announce) - Avaya DEFINITY Server CSI Maintenance Manual

ANNOUNCE (Announce)

ANNOUNCE (Announce)
MO Name (in Alarm Log)
ANNOUNCE
The ANNOUNCE MO logs an error in the hardware error log if at least one of the
following is true:
The save announcements or restore announcements command does
not complete successfully, or the
System fails to restore announcements from the memory card at boot time.
Figure 20 shows the connection of the Announcement Circuit Pack to the system.
To save or restore announcements, an ANNOUNCEMENT Data Extension must
be administered, and at least one DATA-CHL (Network Control Data Channel)
must be in the in-service/idle state.
TN798 Processor
Data-CHL
Software
TDM bus
Figure 20. Connection of announcement circuit pack to the system
555-233-119
Alarm Level
none none
Switch Software Applications
Data-CHL
Software
Network Control
DATA DATA
CHL1 CHL2
Initial Command to Run
Data-CHL Data-CHL
Software Software
DATA DATA
CHL3 CHL4
Announcement
Circuit Pack
Issue 5 October 2002
Full Name of MO
ANNOUNCEMENT
PR-MAINT
CARD-MEM
cydmacps RPY 062397
723