Avaya DEFINITY Server CSI Maintenance Manual page 335

list mst
R1:
Message[7,8]
Message[9]
Types of failure:
0x01 - outgoing ISDN
0x02 - incoming ISDN
Message[10+]
R3:
Message[7-10]
Message[11]
Types of failure:
0x01 - outgoing ISDN
0x02 - incoming ISDN
NOTE:
In abbreviated format, the header of the Q.931 message, the cause IE (if
present) and the channel id IE (if present) are the only IEs present.
An additional cancel byte (0xCA) may be present after the standard
ISDNBRI formatted message if the message was not sent. The cancel byte
will not be appended if the abbreviated format is selected.
General
0x71 - GAP marker
Message[1]
Message[2]
Message[3]
GAP reasons:
0x01 - disabled, disable mst command executed
0x02 - disabled, mst timer expired
0x03 - disabled, buffer full on no-wrap
0x04 - disabled, restart occurred
0x05 - disabled, by stop trigger or count
0x06 - disabled, audit error
0x07 - not disabled, stopped by stop trigger or count
555-233-119
= Link ID
= type of failure
= standard ISDNBRI format
= Link ID
= type of failure
= GAP reason
= GAP count (since last clear - high byte)
= GAP count (since last clear - low byte)
Issue 5 October 2002
335