Avaya DEFINITY Server CSI Maintenance Manual page 498

Maintenance Commands
Note that the line listing of each B-channel's status may continue onto the next
page. The user is prompted to press the
Field descriptions
PRI endpoint extension
Extension
Administered number of B-channels associated with the specified
Width
PRI endpoint
ID number of the signaling group that handles the signaling for the
Signaling Group
ID
ports in the specified PRI endpoint
Administered option for the auto restore feature (restores calls
Originating Auto
Restoration
originated from this PRI endpoint in the case of network failure):
y = restoration option enabled
n = restoration option disabled
The number of B-channels active on a call
B-Channels Active
The number of B-channels in the in-service/idle state
B-Channels Idle
Port locations (cabinet-carrier-slot-circuit) for each of the
Port
B-channels making up the PRI endpoint.
Service state of the B-channels:
Service State
in-service/active, in-service/idle, out-of-service-NE,
out-of-service-FE, maint-NE/active, maint-FE/active, maint-NE/idle,
and maint-FE/idle.
NE (Near End) and FE (Far End) refer to which "end" of the
B-channel has placed the facility in the current state. NE refers to
the switch and FE refers to the PRI terminal adapter (or any device
that terminates the D-channel signaling on the facility).
Whether or not there is any current maintenance testing on the port.
Test In Progress
Connected port location (cabinet-carrier-slot-circuit) for each of the
Connected Port
B-channels active on a call.
498
Issue 5 October 2002
key to continue the display.
NxtPg
555-233-119