Avaya DEFINITY Server CSI Maintenance Manual page 501

status signaling-group
Output
The following output example shows the output from status signaling-group 1.
status signaling-group 1
Group ID: 1
Type: facility associated signaling
Group State: in-service
Link: 1 Port: 01C1924
Link: Port:
Field descriptions
Numerical ID of the signaling group (1-8)
Group ID
facility associated signaling: all members are on a single DS-1 facility.
Type
Facility associated signaling groups support only the simplex D-channel
configuration.
non-facility associated signaling: members can be carried by multiple
DS-1 facilities.
The DS-1 facility is identified across the ISDN-PRI using a facility
identifier. In a simplex configuration, one D-channel is used to signal for
B-channel members.
in-service: one of the D-channels signaling for the group is in service
Group
State
out-of-service: neither D-channel in the group is in service
NOTE:
If there is no D-channel backup and the primary D-channel is
out-of-service, then the signaling group is in an out-of-service state.
Link transporting the D-channel
Link
Address of the port transporting either the primary or secondary D-channel
Port
555-233-119
STATUS SIGNALING-GROUP
Primary D-Channel
Level 3 State: in-service
Secondary D-Channel
Level 3 State:
Page 1 of 1 SPE A
Issue 5 October 2002
501