Avaya DEFINITY Server CSI Maintenance Manual page 145

ATM Tips
2. If connections are being rejected, the Last Cause Code may give a clue
to why. The Cause Code
be on the PPN port even though the EPN port is the one misbehaving, and
vice versa.
Enter show signaling cause causecode on the A500 console.
shows the screen output for this command.
A500:show signaling cause 31
Cause 31: Normal, unspecified
Screen 39. A500:show signaling cause 31
3. At the Avaya Definity Server CSI SAT, type display errors and press
The Error Report screen appears
4. Set Error List to errors and Category to PNC and press
display any Cause Codes (see
ATM network to a TN230X on the PPN (and to a TN230X on an EPN).
This is successful only if the links between the PPN and the EPN remain up
so that the message from the EPN is logged.
See
information regarding Cause Codes for this Maintenance Object.
display errors
The following options control which errors will be displayed.
Screen 40. Avaya Definity Server CSI display errors Input Screen
555-233-119
(Table 17 on page
''ATM-BCH (ATM B-Channel Trunk)'' on page 727
ERROR TYPES
Error Type:
REPORT PERIOD
Interval: a From:
EQUIPMENT TYPE ( Choose only one, if any, of the following )
Cabinet:
Port Network:
Board Number:
Category: PNC
Extension:
Trunk ( group/member ):
146) indicating the error may
(Screen 40).
Table 17 on page 146) returned from the
Page
ERROR REPORT
Error List: errors
/ / : To:
Port:
/
Issue 5 October 2002
Screen 39
.
Enter
to
Enter
for detailed
1 of 1 SPE A
/ / :
145