Display Synchronization - Avaya DEFINITY Server CSI Maintenance Manual

Maintenance Commands

display synchronization

Use display synchronization to display the administered synchronization
stratum and reference sources. This screen is display only.
Action/
Object Qualifier
display print
synchro-
schedule
nization
1 See the Report Scheduler and System Printer feature specification for more details.
Feature Interactions
A DS1 interface or a UDS1 board that has been selected as either a primary or
secondary synchronization source cannot be removed on the DS1 circuit pack
administration form or the regular circuit pack administration form.
Output
The following example shows the output for display synchronization.
display synchronization
SYNCHRONIZATION SOURCE (Synchronization Plan circuit pack location)
Stratum: 4
Primary:
Location Name
01C10 D92D1 ds1 1c10
01C11 D92D1 ds1 1c11
NOTE: DS1 and BRI Trunk sources result in stratum 4, type II synchronization
248
Issue 5 October 2002
Qualifier Description
Report sent to printer
Use the screen to schedule execution of the
command. The command is placed in the
command queue and is executed at the
specified time. The information displayed by
the command is sent to the system printer
1
instead of the screen.
Examples:
display synchronization
display synchronization print
display synchronization schedule
Secondary:
DS1 CIRCUIT PACKS
Slip Location
n
n
Logins Defaults
init none
inads
craft
cust
rcust
bcms
browse
Page 1 of 2
Name Slip
Feature
Interactions
See below
555-233-119