Avaya DEFINITY Server CSI Maintenance Manual page 442

Maintenance Commands
The Meet-Me Number administered for the Meet-Me Extension.
Meet-me
number
in = dial-in to join endpoint to conference.
Dial Type
out = dial-out to join endpoint to conference.
y = the endpoint is in use and is fully-connected on all media in an
In Use
active conference.
c = the endpoint is in use and is fully-connected; however, the
endpoint has changed conference audio or video capability or
conference rate due to rate adaptation. This condition requires
analysis of this endpoint's capabilities and mode fields to identify
reduced capability.
e = the endpoint is in use but has capability problems. The endpoint
lacks one of the required capabilities (Vid, Bhl, MLP) to fully
participate. For MLP capabilities, see the "T120" field. This condition
requires analysis of this endpoint's capabilities and mode field to
identify the missing capability.
f = the endpoint is in use but not connected to all media. The endpoint
declared all required capabilities (channel/video/ audio/data) but is not
fully connected to all conference media. This endpoint may be
connecting, failed to connect, or is not a valid video source. This
condition requires analysis of this endpoint's capabilities and mode
fields to identify the problem.
n = the endpoint disconnected during a conference or unsuccessfully
attempted to connect to a conference.
"blank" = the field is blank until the first call from or to the endpoint.
y = the endpoint has the required number of channels.
Chl
e = the endpoint does not declare support for the correct number of
channels and cannot participate fully in the conference.
n = the endpoint declares the correct number of channels, but not all
join the conference, due to a network or endpoint problem.
"blank" = Audio add-on endpoints set the Chl field to blank.
442
Issue 5 October 2002
555-233-119