Avaya DEFINITY Server CSI Maintenance Manual page 421

status audits
status audits peak-hour
Start Date: 10:00 MON MAR 22 1997
Audit # Cycles
Name Fixed Data
HTLK
HU-CALLS
CR-AUDIT
DE-CALLS
CTRK
AT-ADM
CO-ADM
SE-CALLS
PRI-USR (SCH)
Audit information displays with one line of data displayed audit that has detected
an error or aborted. Audits that did not detect any errors or aborted do not display.
The output sorts in descending order, based on the sum of the values in the #
Cycles Fixed Data, # Cycles Could Not Fix Data, and # Cycles
Audit Aborted fields.
Field descriptions
Date and time that interval begins.
Start Date
"cumulative" = date and time of the last reboot or execution of the
"clear audits cumulative" command.
"peak-hour" = date and time of the beginning of the peak hour since
the last reboot or execution of a "clear audits cumulative" or "clear
audits peak-hour" command.
Number of audit cycles completed in the specified interval
# of Audit Cycles
Completed
(0 – 999999). Asterisks indicate numbers that exceed 999999. The
switch executes audits in a set order. After all audits execute, the
switch restarts the sequence.
Audit's name that detected an error or aborted. A few audits do not
Audit Name
run in the normal audit sequence. These audits run as part of
scheduled maintenance and are marked with "(SCH)".
555-233-119
AUDIT STATUS INFORMATION
# of Audit Cycles Completed:
# Cycles Could
Not Fix Data
0 25
2 0
1 0
1 0
0 1
1 0
1 0
0 0
1 0
NOTE:
Since this field shows the number of completed audit cycles,
it is possible that individual audit values can be larger than
the values described below, if the switch is partially through
another audit cycle. Audit Cycles numbers do not apply to the
audits that execute as part of scheduled maintenance.
# Cycles
Audit Aborted
0
0
0
0
0
0
0
1
0
Issue 5 October 2002
25
421