Avaya DEFINITY Server CSI Maintenance Manual page 370

Maintenance Commands
Action/
Object Qualifier
ping ip-address
node-name
board
packet-
length
repeat
source
1 You can place additional restrictions on the command by selecting the object "ip-address" on the Restricted
Object List:
Type change permissions loginid (an administered login such as inads), and press Enter.
Set the Additional Restrictions field to y in the Administration Commands section of the form.
Go to the second or third page of the form.
Enter ip-address in the list of Restricted Objects and press Enter.
The ping command has the following qualifiers:
''ping ip-address''
''ping node-name''
''ping board''
''ping packet-length''
ping repeat
ping source
ping ip-address
Use ping ip-address to ping the given IP address of the destination to ping. The
command returns:
the port used to perform the test
the pass/fail results of the test
the round-trip delay time for successful tests
the error code on tests that failed.
370
Issue 5 October 2002
Qualifier Description
The IP address of the device to ping in
the following format: www.xxx.yyy.zzz
Administered node name (use display
node-names)
The location of the C-LAN or IP
Medpro board circuit pack (UUCSS)
Range: 64-1,500 bytes
1-100
Examples:
ping ip-address 192.68.3.26
ping ip-address 192.68.3.26 board
1C05
ping ip address 168.24.3.66
packet-length 1500
The ping source can be a virtual
endpoint port ID.
Examples: ping ip-address
192.68.3.26 source S00015
1
Logins Defaults
init packet
inads length =
craft 64 bytes
customer
Feature
Interactions
555-233-119