List Measurements Clan Ethernet - Avaya DEFINITY Server CSI Maintenance Manual

Maintenance Commands
Field descriptions
The port address (cabinet-carrier-slot-circuit) of the marked port.
Port
The type of circuit pack containing the marked port. If this circuit pack
Board-Type
information is no longer available because the circuit pack was removed
after the port was marked, the Board-Type field is blank.

list measurements clan ethernet

Use list measurements clan ethernet to list a 24-hour history of packet-level
statistics. Use the history to review LAN performance characteristics. For
example:
High collision counts could indicate high traffic on the LAN segment
(congestion on the bus).
High Cyclic Redundancy Check (CRC—detects and corrects errors on
every frame) errors could show
— the LAN connection may be "noisy"
— a wire connection is loose
— a wire is frayed or broken.
The 24-hour history gives the ability to look back at these measures if the trouble
cleared.
The data is collected at 15-minute intervals over 24 hours for the Cyclic
Redundancy Check (CRC) and collisions for ethernet connections. If the data
cannot be retrieved for the 15-minute interval, N/A displays in the field. The delta
(the change from the last inquiry) and the total are provided for each error count.
After the occurrence of "N/A" (not available), the delta equals the total.
The primary use of this command is to quickly and unambiguously determine if
the fault lies within the Avaya-provided equipment or if the fault is with the LAN or
LAN administration to which the Avaya equipment is connected.
292
Issue 5 October 2002
555-233-119