Avaya DEFINITY Server CSI Maintenance Manual page 702

Maintenance Objects
n. Error type 3999
control channel messages to the switch within a short period of time. If
error type 1538 is also present, the circuit pack was taken out-of-service
due to hyperactivity. If error type 1538 is not present, the circuit pack has
not been taken out-of-service, but it has generated 50% of the messages
necessary to be considered hyperactive. This may be completely normal
during heavy traffic periods. However, if this error type is logged when the
circuit pack is being lightly used, it may indicate a problem with the circuit
pack or the equipment attached to it.
o. Error Type 2
Data Line extension assigned to the TN750 for uploading and downloading
announcements. The extension can be found by using list data-module.
System Technician-Demanded Tests: Descriptions
and Error Codes
Always investigate tests in the order presented in
in the system. By clearing error codes associated with the Control Channel Loop
Around Test, for example, you may also clear errors generated from other tests in
the testing sequence.
Table 57. System Technician-Demanded Tests: ANN-BD
Order of Investigation
Control Channel Loop Around Test (#52) (a)
Angel-Speech Processor (SP) Handshake Test
(#208)
Clock Match Inquiry (#212)
Super Frame Match Inquiry (#211)
140AY Loop Around Test (#210)
Announcement Checksum Test (#209)
Network Processor Element (NPE) Audit Test
(#50) (a)
SAKI Test (#53) (a)
1. D = Destructive, ND = Non-destructive
Note:
a. For a complete description of these tests, refer to the "XXX-BD (Common
Port Circuit Pack)" Maintenance documentation.
702
Issue 5 October 2002
Indicates that the circuit pack sent a large number of
Check the Class of Restriction (COR) administered for the
Short Test
Sequence
X
X
X
X
Table 57 when inspecting errors
Reset
Long Test Board
Sequence Sequence
X
X
X
X
X
X
X
X
Continued on next page
555-233-119
1
D/ND
ND
ND
ND
ND
ND
ND
ND
D