Reset Translation-Id; Reset Val - Avaya DEFINITY Server CSI Maintenance Manual

Maintenance Commands

reset translation-id

Use reset translation-id to reset the translation-ID on the translation card(s) to
match the processor(s), saves translations to the memory card, and restore use of
the add, change, remove, and duplicate commands.
NOTE:
This command can be executed only by Avaya Services.
Action/Object Qualifier
reset
translation-id
Error message
In duplicated systems, the message,
Cannot reset translation-ID without standby SPE being
accessible
means that both processors must be sane and operational.
A standby SPE that has been busied out must be released (release
standby-spe).
Check that the SPE-select switches on the DUPINT circuit pack are in the
AUTO position.

reset val

Use reset val to perform the functions of reset board , but override querying the
board to determine if an announcement autosave is in process. This allows
resetting the circuit pack if it is in the insane state.
Output
The following shows an example of reset val.
reset val 1C07
Port Maintenance Name
01C07 VAL-BD
396
Issue 5 October 2002
Qualifier Description Logins
Example: Avaya Services
reset translation-id only
TEST RESULTS
Alt. Name Test No. Result
53
Defaults Feature Interactions
See
Error Code
PASS
''Error message''
555-233-119