Avaya DEFINITY Server CSI Maintenance Manual page 444

Maintenance Commands
Rate adaptation/Interworking indicator (5, 6, y, c, e, n, blank). 5 and
Rate Adpt
"6" apply to Low Speed/High Speed Interworking. All other values
apply to Rate Adaptation.
5 = 56-kbps (Low Speed) endpoint joins a High Speed (128 kbps or
above) conference. This endpoint connects with audio only capability
but is not a valid video source and destination.
6 = 64-kbps (Low Speed) endpoint joins a High Speed (128 kbps or
above) conference. This endpoint connects with audio only capability
but is not a valid video source and destination.
y = Endpoint joins the conference at 64 kbps, but because rate
adaptation to 56 kbps is triggered by another endpoint, this endpoint
rate adapts to 56 kbps.
c = The administered conference bandwidth is 64 kbps. This endpoint
joins the conference at 56 kbps. The first 56 kbps endpoint that joins
64 kbps rate adaptable conferences triggers rate adaptation (see Join
Time below).
n = Another endpoint triggers a 64-kbps conference to rate adapt to 56
kbps. This endpoint joins the conference at 64 kbps, but encounters
problems in rate adapting to 56 kbps. This endpoint may have audio
and may be receiving video, but is not a valid video source.
"blank" Rate adaptation was not triggered by any endpoint. If this
endpoint is in use and connected, it joins the conference at the
administered bandwidth.
BONDing Mode = blank for calls that are unrelated to bonding.
Bond Mode
t = The endpoint detects voice energy (talking).
Ts
m = The endpoint indicates to the MCU that it is muted. It is possible
for an endpoint to mute, but not send any indication to the MCU. In this
situation the MCU does not display a mute indication.
M = UDD/CRCS Agent interface mutes the endpoint's audio. Both the
endpoint and the UCC/CRCS Agent must mute the endpoint audio.
S = The solo-audio state set by UCC/CRCS Agents mutes the
endpoint's audio. While in solo-audio state, new endpoints that join the
conference automatically mute.
"blank" = Voice energy (talking) is not detected from the endpoint.
444
Issue 5 October 2002
555-233-119