Avaya DEFINITY Server CSI Maintenance Manual page 398

Maintenance Commands
To prepare for a failure, users should copy announcement files to
announcement boards. If errors result from hardware or firmware failures,
MSS software logs hardware errors with maintenance. When errors occur,
the system continually attempts to download boards in 10-minute intervals
until a download succeeds, announcements record, or downloads initiate
from the SAT. Then, error messages display indicating corrective action. If
errors result from hardware or firmware failure, MSS software logs a
hardware error with maintenance. Maintenance software invokes tests to
diagnose and attempt to correct the problem. If maintenance software fails
to correct problems, alarms raise indicating additional corrective action.
When the system crashes and/or a spontaneous processor interchange
occurs, the restore operation fails. Valid announcement files do not appear
on the announcement board. To copy the announcements from the active
processor's MSS device to the announcement board, restart the command
on the newly- active processor. When announcements completely copy to
announcement boards, calls do not connect to announcements on the ANN
board.
When announcement boards are plugged in or reset, maintenance
performs a series of tests, including a DRAM Checksum test. Tests fail due
to power losses to boards, resulting in an automatic download of
announcement files.
Output
The following example shows the output from restore announcements.
restore announcements
Processor Command Completion Status
SPE-A Success
Field descriptions
Processor
Command Completion
Status
Error Code
398
Issue 5 October 2002
Page 1 of
RESTORE ANNOUNCEMENTS
Displays the processor that houses the MSS device used to
copy announcement data.
Specifies successful completion of the command.
System-generated description of a command failure.
1 SPE A
Error Code
0
555-233-119