Enable Iparp Checking - Extreme Networks ExtremeWare XOS Command Reference Manual

enable iparp checking

enable iparp checking
enable iparp {vr <vr_name>} checking
Description
Enables checking if the ARP Request source IP address is within the range of the local interface or
VLAN domain.
Syntax Description
vr_name Specifies a virtual router.
Default
Enabled.
Usage Guidelines
If you do not specify a virtual router, the command applies to the current virtual router.
Example
The following command enables IP ARP checking:
enable iparp checking
History
This command was first available in ExtremeWare XOS 10.1.
The option was added in ExtremeWare XOS 11.0
vr
Platform Availability
This command is available on all platforms.
1129
ExtremeWare XOS 11.3 Command Reference