IPv6 Unicast Commands
configure vlan router-discovery other-config-flag
configure vlan <vlan_name> router-discovery {ipv6} other-config-flag
<on_off>
Description
Configures the other stateful configuration flag value sent in router discovery advertisements on the
VLAN.
Syntax Description
vlan_name
on_off
Default
Off.
Usage Guidelines
This command configures the contents of the other stateful configuration flag in the router
advertisement messages.
When set to on, hosts use the administered (stateful) protocol (DHCP) for autoconfiguration of other
(non-address) information. If this command is not entered, the default value is off.
Example
The following command configures the other stateful configuration flag to be on for the VLAN top_floor:
configure vlan top_floor router-discovery other-config-flag on
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1184
Specifies an IPv6 configured VLAN.
Specifies setting the flag to on or off.
ExtremeWare XOS 11.3 Command Reference