Disable Bgp Neighbor Soft-In-Reset - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

disable bgp neighbor soft-in-reset

disable bgp neighbor [all | <remoteaddr>] {address-family [ipv4-unicast |

ipv4-multicast]} soft-in-reset

Disables the soft input reset feature.

Syntax Description

address-family

If no address family is specified, IPv4 unicast is the default.

Usage Guidelines

Disabling the soft input reset feature can potentially limit the amount of system memory consumed by

This command can be issued only when both BGP and the BGP neighbor is disabled.

The following command disables the soft input reset for the neighbor at 192.168.1.17:

disable bgp neighbor 192.168.1.17 soft-in-reset

This command was first available in ExtremeWare XOS 10.1.

This command required an Advanced Core license in ExtremeWare XOS 11.1.

Platform Availability

This command is available on platforms with a Core or an Advanced Core license.

ExtremeWare XOS 11.3 Command Reference

Specifies all neighbors.

Specifies an IP address.

The address family. BGP supports two address families: IPv4 Unicast and IPv4

disable bgp neighbor soft-in-reset

Extremeware xos 11.3