Configure Esrp Add Track-Vlan - Extreme Networks ExtremeWare XOS Command Reference Manual

ESRP Commands

configure esrp add track-vlan

configure esrp <esrpDomain> add track-vlan <vlan_name>
Description
Configures an ESRP domain to track port connectivity to a specified VLAN.
Syntax Description
esrpDomain
vlan_name
Default
Disabled.
Usage Guidelines
The track-vlan metric is derived from the total number of active physical ports on the VLAN being
tracked by the ESRP domain.
If more than one VLAN shares a physical link, each VLAN counts the physical link.
The ESRP switch should have a higher priority number than its neighbors to ensure master election.
An ESRP domain can track one VLAN, and the tracked VLAN should not be a member of any other
ESRP domain in the system.
Example
The following command enables ESRP domain esrp1 to track port connectivity to VLAN engineering:
configure esrp esrp1 add track-vlan engineering
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
994
Specifies an ESRP domain name.
Specifies the VLAN to be tracked.
ExtremeWare XOS 11.3 Command Reference