enable irdp
enable irdp
enable irdp {vlan <name>}
Description
Enables the generation of ICMP router advertisement messages on one or all VLANs.
Syntax Description
name
Specifies a VLAN name.
Default
Disabled.
Usage Guidelines
ICMP Router Discovery Protocol allows client machines to determine what default gateway address to
use. The switch will send out IP packets at the intervals specified identifying itself as a default router.
IRDP enabled client machines will use this information to determine which gateway address to use for
routing data packets to other networks.
If no optional argument is specified, all the IP interfaces are affected.
Example
The following command enables IRDP on VLAN accounting:
enable irdp vlan accounting
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1139
ExtremeWare XOS 11.3 Command Reference