Extreme Networks ExtremeWare XOS Command Reference Manual page 1407

Interface Cost metric Table
■
Route Redistribution
■
Example
The following command resets the OSPFv3 interface to the default settings on the VLAN accounting:
unconfigure ospfv3 accounting
The following command unconfigures the parameters of the area 0.0.0.1 (and all its associated
interfaces):
unconfigure ospfv3
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
ExtremeWare XOS 11.3 Command Reference
domain ospf-default area 0.0.0.1
unconfigure ospfv3
1407