Configure Bgp Peer-Group Route-Reflector-Client - Extreme Networks ExtremeWare XOS Command Reference Manual

BGP Commands

configure bgp peer-group route-reflector-client

configure bgp peer-group <peer-group-name> [route-reflector-client | no-
route-reflector-client]
Description
Configures all the peers in a peer group to be a route reflector client.
Syntax Description
peer-group-name
route-reflector-client
no-route-reflector-client
Default
N/A.
Usage Guidelines
This command implicitly defines this router to be a route reflector.
The peer group must be in the same AS of this router.
Example
The following command configures the peer group outer as a route reflector client:
configure bgp peer-group outer route-reflector-client
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1460
Specifies a peer group.
Specifies that all the neighbors in the peer group be a route reflector client.
Specifies that all the neighbors in the peer group not be a route reflector
client.
ExtremeWare XOS 11.3 Command Reference