RIPng Commands
configure ripng routetimeout
configure ripng routetimeout <seconds>
Description
Configures the route timeout period for RIPng.
Syntax Description
seconds
Specifies a time in seconds. Range is 10 to 3600.
Default
180 seconds.
Usage Guidelines
If a router does not receive an update message from its neighbor within the route timeout period (180
seconds by default), the router assumes the connection between it and its neighbor is no longer
available.
The configured value is rounded off to the nearest multiple of 10.
Example
The following example sets the route timeout period to 120 seconds:
configure ripng routetimeout 120
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1254
ExtremeWare XOS 11.3 Command Reference