Configure Ospf Vlan Neighbor Delete - Extreme Networks ExtremeWare XOS Command Reference Manual

OSPF Commands

configure ospf vlan neighbor delete

configure ospf vlan <vlan-name> neighbor delete <ip-address>
Description
Deletes the IP address of a point-to-point neighbor.
Syntax Description
vlan-name
ip-address
Default
N/A.
Usage Guidelines
None.
Example
The following command deletes the IP address of a point-to-point neighbor:
configure ospf vlan accounting neighbor delete 10.0.0.1
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1320
Specifies a VLAN name.
Specifies an IP address.
ExtremeWare XOS 11.3 Command Reference