Configure Vlan Router-Discovery Link-Mtu - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

IPv6 Unicast Commands

configure vlan router-discovery link-mtu

configure vlan <vlan_name> router-discovery {ipv6} link-mtu <linkmtu>

Configures the link MTU value sent in router discovery advertisements on the VLAN.

Syntax Description

0, meaning that no link MTU information is sent.

Usage Guidelines

This command configures the link MTU placed into the router advertisement messages. Advertisement

of the MTU helps ensure use of a consistent MTU by hosts on the VLAN.

The minimum value is 0. The maximum value is 9216. The default value is 0, which means that no link

MTU information is included in the router discovery messages.

The following command configures the link MTU to be 5126 for the VLAN top_floor:

configure vlan top_floor router-discovery link-mtu 5126

This command was first available in ExtremeWare XOS 11.2.

Platform Availability

This command is available on all platforms.

Specifies an IPv6 configured VLAN.

Specifies the link MTU. Range is 0 to 9216.

ExtremeWare XOS 11.3 Command Reference

Extremeware xos 11.3