Configure Ospfv3 Spf-Hold-Time - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

configure ospfv3 spf-hold-time

configure ospfv3 {domain <domainName>} spf-hold-time <seconds>

Configures the minimum number of seconds between Shortest Path First (SPF) recalculations.

Syntax Description

Usage Guidelines

Setting the interval too high will force OSPFv3 to run SPF calculations less frequently. This will reduce

the CPU load, but will cause delay in routes getting updated in the IP routing table. Setting the interval

too low will decreases the interval between SPF calculations, but will increase the processing load on

The following command configures the minimum number of seconds between Shortest Path First (SPF)

recalculations:

configure ospfv3 spf-hold-time 6

This command was first available in ExtremeWare XOS 11.2.

Platform Availability

This command is available on platforms with a Core or an Advanced Core license.

ExtremeWare XOS 11.3 Command Reference

Specifies an OSPFv3 domain. OSPF-Default is the only one currently

Specifies a time in seconds. The range is 0 to 300 seconds.

configure ospfv3 spf-hold-time

Extremeware xos 11.3