Configure Bgp Neighbor Description - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

configure bgp neighbor description

bgp neighbor

Configures a description for a BGP neighbor.

Syntax Description

The description is a NULL string by default.

Usage Guidelines

Use this command to attach a description to a BGP neighbor. This description will be displayed in the

output of the

show bgp neighbor

a particular neighbor. Enclose the string in double quotes if there are any blank spaces in the string. The

maximum length of the string is 56 characters.

If you do not specify the

The following command configures the description for the BGP neighbor 192.168.1.22 to Toledo_5:

configure bgp neighbor 192.168.1.22 description Toledo_5

This command was first available in ExtremeWare XOS 11.0.

This command required an Advanced Core license in ExtremeWare XOS 11.1.

Platform Availability

This command is available on platforms with a Core or an Advanced Core license.

ExtremeWare XOS 11.3 Command Reference

[all | <remoteaddr>] description {<description>}

Specifies an IP address of a BGP neighbor.

Specifies all neighbors.

Specifies a string used to describe the neighbor.

command when you specify the

parameter, the description will be reset to the default.

configure bgp neighbor description

option, or when you specify

Extremeware xos 11.3