Configure Irdp - Extreme Networks ExtremeWare XOS Command Reference Manual

IP Unicast Commands

configure irdp

configure irdp [multicast | broadcast | <mininterval> <maxinterval>
<lifetime> <preference>]
Description
Configures the destination address of the router advertisement messages.
Syntax Description
multicast
broadcast
mininterval
maxinterval
lifetime
preference
Default
Broadcast (255.255.255.255). The default mininterval is 450.
Usage Guidelines
ICMP Router Discovery Protocol allows client machines to determine what default gateway address to
use. The switch will send out IP packets at the intervals specified identifying itself as a default router.
IRDP enabled client machines will use this information to determine which gateway address to use for
routing data packets to other networks.
Example
The following command sets the address of the router advertiser messages to multicast:
configure irdp multicast
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1094
Specifies multicast setting.
Specifies broadcast setting.
Specifies the minimum time between advertisements.
Specifies the maximum time between advertisements. Default is 600.
Specifies the lifetime of the advertisement. Default is 1800.
Specifies the router preference level. Default is 0.
ExtremeWare XOS 11.3 Command Reference