Show Ripng Interface - Extreme Networks ExtremeWare XOS Command Reference Manual

RIPng Commands

show ripng interface

show ripng interface {detail | vlan <vlan-name> | tunnel <tunnel-name>}
Description
Displays RIPng-specific configuration and statistics for the specified interface.
Syntax Description
detail
vlan-name
tunnel-name
Default
Show summary output for all interfaces.
Usage Guidelines
Displays the RIPng interface configuration and runtime information. If no interface is specified, only the
summary data for all the configured interfaces is displayed. If an interface is specified, only the data for
that interface is displayed in detail. If the keyword
displayed.
Example
The following command displays the RIPng configuration summary for all interfaces:
show ripng interface
The following is sample output from this command:
VLAN
v1
v2
v3
v4
Flags: (f) Interface Forwarding Enabled, (i) Interface RIPng Enabled
(n) Multinetted Interface, (r) Router RIPng Enabled
(p) Poison Reverse Enabled, (s) Split Horizon Enabled
(t) Trigerred Update Enabled.
1276
Specifies detailed display.
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
IP Address Flags
22cc::3 /64 rif-pst
22bb::1 /64 rif-pst
2abc::1 /120 rif-pst
3ffe::1 /64 rif-pst
is specified, detailed data for all interfaces is
detail
Sent Rcvd Triggered Cost
Packets Packets Updates
106349 106349 3
106349 106095 3
106351 0 4
106349 139124 3
ExtremeWare XOS 11.3 Command Reference
15
1
1
1