Configure Ospf Ase-Limit - Extreme Networks ExtremeWare XOS Command Reference Manual

OSPF Commands

configure ospf ase-limit

configure ospf ase-limit <number> {timeout <seconds>}
Description
Configures the AS-external LSA limit and overflow duration associated with OSPF database overflow
handling.
Syntax Description
number
seconds
Default
The default for timeout is 0, which indicates that once the router goes into overflow state, it stays there
until OSPF is disabled and then re-enabled.
Usage Guidelines
None.
Example
The following command configures the AS-external LSA limit and overflow duration:
configure ospf ase-limit 50000 timeout 1800
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1302
Specifies the number of external routes that can be held in a link-state
database.
Specifies a duration for which the system has to remain in the overflow state.
ExtremeWare XOS 11.3 Command Reference