Configure Vrrp Vlan Vrid Add Track-Vlan - Extreme Networks ExtremeWare XOS Command Reference Manual

configure vrrp vlan vrid add track-vlan

configure vrrp vlan <vlan_name> vrid <vridval> add track-vlan
<target_vlan_name>
Description
Configures a VRRP VLAN to track port connectivity to a specified VLAN. When this VLAN is in the
"down" state, this entry is considered to be failing.
Syntax Description
vlan_name
vridval
target_vlan_name
Default
N/A.
Usage Guidelines
Up to eight VLANs can be tracked.
Deleting a tracked VLAN does not constitute a failover event for the VR tracking it, and the tracking
entry will be deleted.
Example
The following command enables VRRP VLAN vlan-1 to track port connectivity to VLAN vlan-2:
configure vrrp vlan vlan-1 vrid 1 add track-vlan vlan-2
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies the name of a VRRP VLAN.
Specifies the VRRP virtual router ID of the target virtual router. Value can be
in the range of 1-255.
Specifies the name of the VLAN to track.
configure vrrp vlan vrid add track-vlan
1047