Configure Vlan Router-Discovery Retransmit-Time - Extreme Networks ExtremeWare XOS Command Reference Manual

IPv6 Unicast Commands

configure vlan router-discovery retransmit-time

configure vlan <vlan_name> router-discovery {ipv6} retransmit-time
<retransmittime>
Description
Configures the retransmit time value in router discovery advertisements on the VLAN.
Syntax Description
vlan_name
retransmittime
Default
0, meaning that no retransmit time information is sent.
Usage Guidelines
This command configures the retransmit time value in the router advertisement messages.
The retransmit time, in milliseconds, is the time between retransmitted neighbor solicitation messages.
A value of 0 means the value is unspecified by this router. The maximum value is 4,294,967,295. The
default value is 0.
Example
The following command configures the retransmit time to be 604,800,000 milliseconds (one week) for
the VLAN top_floor:
configure vlan top_floor router-discovery retransmit-time 604800000
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1186
Specifies an IPv6 configured VLAN.
Specifies the reachable time value in advertisements, in milliseconds. Range is
0 to 4,294,967,295 (approximately 50 days).
ExtremeWare XOS 11.3 Command Reference