Configure Ospf Cost - Extreme Networks ExtremeWare XOS Command Reference Manual

configure ospf cost

configure ospf [area <area-identifier> | vlan [<vlan-name> | all]] cost
[automatic | <cost>]
Description
Configures the cost metric of one or all interface(s) or an area.
Syntax Description
area-identifier
vlan-name
all
automatic
cost
Default
The default cost is automatic.
Usage Guidelines
The range is 1 through 65535.
Example
The following command configures the cost metric of the VLAN accounting:
configure ospf vlan accounting cost 10
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies an OSPF area.
Specifies a VLAN name.
Specifies all VLANs.
Determine the advertised cost from the OSPF metric table.
Specifies the cost metric.
configure ospf cost
1285