OSPFv3 Commands
configure ospfv3 area normal
configure ospfv3 {domain <domainName>} area <area-identifier> normal
Description
Configures an OSFPv3 area as a normal area.
Syntax Description
domainName
area-identifier
Default
Normal.
Usage Guidelines
A normal area is an area that is not any of the following:
Stub area
●
NSSA
●
Virtual links can be configured through normal areas. External routes can be distributed into normal
areas.
Example
The following command configures an OSPFv3 area as a normal area:
configure ospfv3 area 10.1.0.0 normal
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1366
Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
Specifies an OSPFv3 area, a four-byte, dotted decimal number.
ExtremeWare XOS 11.3 Command Reference